Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us

Marble · Mosaics
Sahara Beige herringbone comes as a honed marble mosaic sheet at 12 1/8 by 13 3/8, the bars already set at their angles. Each sheet covers 0.94 square feet, six to a box, and a sample can be ordered before committing to a run.
Design
Herringbone lives or dies on whether the angle carries across the whole area, and a mesh sheet takes most of that risk away by fixing the geometry before it leaves the factory. What remains is lining up the sheets. As beige marble mosaics go this one shows moderate variation, so tone moves from piece to piece. Honing keeps the surface matte and a 2x12 andorra trim runs in the same stone.
The herringbone is set on the sheet, so only the sheet joins need aligning.
A 2x12 profile in this stone finishes an edge.
Where to use it
Approvals run across commercial and residential interiors, walls and floors, wet rooms on both surfaces, and backsplashes, with bathroom, kitchen and living room recorded. Thirteen boxes cover 60 square feet including the cutting margin. Sheets need full adhesive behind them, and because tone moves, mixing boxes during setting is worth the extra minute. Sheets should also be dry laid across the area before any adhesive goes down, so the angle can be checked to run true from one side of the room to the other.
5.64 square feet a box, waste counted, over 60 square feet.
Moderate variation spreads best when several boxes are open.
Also in this colour
Why we chose it
Seal after installation, reseal every one to two years. Acidic products dull the surface on contact, so routine cleaning means a pH neutral stone cleaner and nothing harsher.
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Your cart is empty.